Classic Gunsmith Adapters

The installation of a Gunsmith Adapter involves removing the rifle action from the stock, marking the center point of the stock, and boring a hole to fit the adapter. It is recommended to seek the help of a professional gunsmith if you are not comfortable with the process.

The adapter should be centrally positioned on the centerline of the forearm, ensuring it does not obstruct other fittings or come into contact with the barrel. It should have sufficient space to fit and to accept any bedding medium used.

For solid material stocks, use a 19mm Forstner bit. For hollow stocks, an 18mm Hole Saw works well. If the initial fitting is too tight, a small rotary power tool can be used to enlarge the hole slightly.

For solid stocks, clean the bored hole with a suitable solvent degreaser and use a small amount of suitable epoxy, such as Devcon 10110 Type-A Plastic-Steel Putty, to bond the adapter in place. For hollow stocks, ensure the epoxy fully surrounds the adapter from the base to the top without reaching the barrel. After the epoxy cures, remove the masking material, clean the area, reassemble the action to the rifle, and check the zero.