Gobbler Adapter
Built for the long sits and slow mornings of turkey season, this purpose-designed adapter allows you to mount a bipod directly to the end of the magazine cap or forend cap of your shotgun. When you’re tucked into the timber waiting on a stubborn gobbler to ease across your lane, this low-profile setup delivers a rock-solid front rest without adding unnecessary bulk or getting in the way.
Paired with the Springbok Bipod, it keeps your shotgun steady, quiet, and ready for that one clean shot. So when that tom finally steps into range, you’re settled, confident, and right on him.
Please note that this adapter is only compatible with shotguns equipped with a magazine cap featuring a sling stud measuring 9.3 mm or smaller in diameter.
The adapter is designed to be hand-tightened only onto the magazine cap. This ensures a secure fit while reducing the risk of the magazine cap loosening or unintentionally unscrewing during use.
- Attaches to the end cap of a Shotgun allowing to mount a bipod to stable your shotgun on your target.
- Paired with the SpringbokBipod, Silicone body enables rapid shooting position changes and cant compensation.
- Easy Installation.
- 2.6oz / 74g
- Fits ≤9.3 mm sling studs
- Hard-anodized 7075-T7351 aluminum & SUS303
Gobbler Adapter Product Guide
Designed to fit standard sling studs with a diameter of 9.3 mm or smaller. Sling studs exceeding 9.3 mm in diameter are not compatible.
Installation & Safety: The adapter is designed to be hand-tightened only onto the magazine cap. This ensures a secure fit while reducing the risk of the magazine cap loosening or unintentionally unscrewing during use.
Our unique guarantee is designed to support you before, during, and after your hunt. Combining expert gear advice, ongoing aftercare, and the Spartan Promise, so you can get more out of every piece of gear.
For more information, please visit our Spartan Promise page.
Easy Seated Shooting
Designed for turkey hunters, this adapter enables bipod use on your shotgun to provide stable, hands-free support while calling or waiting on a bird. It keeps the gun ready and properly oriented without resting it on your knee, helping reduce fatigue and movement during long setups.
Easy Seated Shooting
Designed for turkey hunters, this adapter enables bipod use on your shotgun to provide stable, hands-free support while calling or waiting on a bird. It keeps the gun ready and properly oriented without resting it on your knee, helping reduce fatigue and movement during long setups.
Use of a Bipod with a Shotgun
Easy Installation
This adapter can be fitted to the sling stud on your shotgun in under 2 minutes, the magazine cap can be removed without disassembling the gobbler fully. Please refer to our Installation Guide for instructions.
Quick Detach with MagnaSwitch™
Attaching a bipod or tripod in seconds, providing a quick rest and a easily changeable shooting position for setting up your shot.
Maintaining a Ready Position
A bipod provides stable, hands free support while waiting in position, keeping the shotgun safely oriented and ready without resting it on the hunter’s knee. This reduces fatigue and movement, allowing for a steadier and more consistent ready position after extended periods of waiting.
Pairing the SpringBok Bipod
The SpringBok Bipod weighing only 10.6oz can be carried in your pack, attaching only when you need it, reducing the need to rest your shotgun on your knee. The SpringBok Bipod is adjustable for seated and kneeling shots, perfect for Turkey Hunting.
Sling Stud Alternative
Guide Adapter
If your shotgun instead has a sling stud located on the underside of the stock, the Guide Adapter would be required to facilitate bipod attachment.
If your shotgun does not feature a sling stud in either location, the gobbler or the guide adapter will not be compatible.
SHOP NOWExplore More Details
Technical Specifications
- Weight2.6oz / 74g
- Width32mm / 1.26"
- Shot Gun CompatibilityFits ≤9.3 mm sling studs
- Compatible ProductsSpringBok Bipod / SpringBok Tripod
- MaterialsHard-anodized 7075-T7351 aluminum & SUS303
FAQs
Will this Adapter work with my Shotgun ?
This adapter is designed for shotguns equipped with a magazine cap sling stud, accommodating sling studs with a diameter of 9.3 mm or smaller.
If your shotgun instead has a sling stud located on the underside of the stock, the Guide Adapter would be required to facilitate bipod attachment.
If your shotgun does not feature a sling stud in either location, neither the gobbler or the guide adapter will not be compatible.
Why would you use a bipod and a Tripod on a ShotGun ?
Mounting a bipod or tripod on a shotgun provides fast, stable support while keeping the firearm safely oriented and ready. Quick-detach systems like MagnaSwitch™ allow the support to be attached or removed in seconds, so the shooter can stay mobile yet instantly build a solid position when an opportunity appears. For hunters typically resting their shotgun on their knee, this reduces fatigue, minimizes movement, and delivers a steadier, more consistent shot when it matters.
What products are compatible with this Adapter.
Most Magnaswitch-compatible products will interface with this adapter. However, two products are specifically designed with shotgun applications in mind: the Springbok Bipod and the Springbok Tripod.
Product Guide
Recommended Products
